Volden Plasterboard adhesive 10kg 8.7L Bag

Product information

For adhering plasterboards to masonry walls using the dot and dab method.

• Before starting, make sure all tools and mixing containers are clean and free from other product contaminates. Site temperature is to be kept above 5 degrees until dry. Add powder to clean water (usually 10kg material to 5.5L water) and mix until the product is smooth with no lumps, Working time is up to 65 minutes from mixing. Product should be fully set before finisining (usually 90 mins). Please note: Setting times will reduce by suctions, Cold and damp environments will increase setting times.
• For adhering plasterboards to masonry walls using the dot and dab method.
• Keep out of reach of children and animals. Inhalation of dust must be avoided. The work area must be ventilated or move to fresh air. A suitable face mask should be worn if sanding. Dust may be an irritant to eyes, sensitive skin or respiratory system. If irritation persists seek medical advice. Ingestion should be avoided. If ingested, rinse mouth with clean water and seek medical advice.

Features and benefits

• Ideal for the dot & dab method of bonding plasterboard onto walls
• Powdered Formulation - Requires Mixing
• Super strong adhesion & grab
• Working time 60 mins
• High to low suction substrates