38 people bought this in 48 hours
Volden Ready mixed Plasterboard Jointing, filling & finishing compound 10kg 6.5L Tub
Product details
Product information
The strength in this ready mixed formulation make is perfect for those not wishing to use scrim tape. Gypsum based with a higher polymer content this product has been designed for jointing plasterboards when drylining and for use on areas that are more. susceptible to cracking. Easy to sand in preparation for decorating
- Using a trowel or jointing knife apply the compound at an angle to ensure the compound is fully pressed into the joints. Once the first coat has dried, apply a second. Once set hard, rub down using sandpaper. Note this is harder to sand due to the stronger polymers used. Brush or wipe down to remove any dust created from sanding. Apply a primer before decorating.
- Designed for jointing plasterboards when drylining and and for use on areas that are more suceptble to cracking. Easy to sand in preparation for decorating
- Keep out of reach of children and animals. Inhalation of dust must be avoided. The work area must be ventilated or move to fresh air. A suitable face mask should be worn if sanding. Dust may be an irritant to eyes, sensitive skin or respiratory system. If irritation persists seek medical advice. Ingestion should be avoided. If ingested, rinse mouth with clean water and seek medical advice.
Features and benefits
- Stronger formulation. Perfect for filling, smoothing walls, ceilings and plasterboard repairs in areas more susceptible to movement
- Ready Mixed
- Easy to sand
- High cracking resistance
- High adhesion to most building surfaces
- Suitable for use around doors & windows
- This plaster's white colour ensures a lower number of coats while painting
- Can be stored and reused at a later date (see use by date on packaging)
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
DetailsSpecifications
| Application method | Trowel or filling knife |
|---|---|
| Colour | White |
| Coverage | 6.5m² |
| Drying time | 1-2 h |
| Location | Internal |
| Maximum application temperature | 40°C |
| Minimum application temperature | 10°C |
| Number of coats | 2 |
| Paintable | Paintable |
| Sandable | Sandable |
| Setting time | 120min |
| Standard | TS EN 13963 |
| VOC level | No VOC level recorded |
| Volume | 6.5L |
| Weight (kg) | 10kg |
| Product code | 5063022091482 |
Manufacturer / EU responsible person
Reviews
4.06 / 5(16 reviews)Diwhyer1 - 5 / 5 - 04/12/2024
Fantastic stuff
Brilliant stuff. No tape needed and no cracks. Saves so much time and effort. Super easy to use and great value. Plus also works great as a filler as it sands super smooth.
Rich1357743 - 5 / 5 - 07/11/2024
Great stuff
Great product works well, easy to apply easy to sand
DebWarb - 2 / 5 - 18/10/2024
not as expected
Product was not as expected and did not give the finish required
Ian222222222222 - 1 / 5 - 17/03/2024
volden p/board jointing/filling/finishing ready
need to fill holes left by removing skirting boards. I have done loads of these type of repairs before over the last 40/ or so years and can only say that this is the worst type of filler/skim I have ever used. For a start it's like working with toffee half melted. As applied it tends to pull off wall if you try to go over it and now two days after applying it still is not dry enough to recoat with another (proper) plaster I'm going to use to fill in loads of places. I wish that I had stuck with "normal" bonding coat and finish coat. Where it has formed a skim as custard does if you press it you can feel it give as it's still not set underneath and leaves a depression where you have pressed.
DoYouRateIt - 5 / 5 - 24/02/2024
No Tape Filler
Easy to apply for the DIYer Once you get used to the consistency it is good for area repairs, corners with or without web tape as well as the smallest blemishes
badcadence - 5 / 5 - 09/11/2023
Just the stuff
Hold this up to Toupret any day of the week, not let me down once.
SuperDIYDad - 5 / 5 - 09/11/2023
Fill in the gaps
Bought after ripping the day do rail off from the hallway. The quote for plastering the hallway wasnt an option due to cost so this was the next best thing. I found it to be really good actually. The mixture is elastic and dries solid. Deep holes or gaps need staged filling and doesn't define gravity unfortunately.
Adrian - 1 / 5 - 30/10/2023
It should say: "Extremely quick drying"
I'm not a professional just a DIY-er so I am used to another brand of ready mix which takes a really long time to dry but then you have plenty of time to work with as that one I can trowel it, go a couple (or more) times over it to smooth it, wait some 20 minutes and using a very wide spatula smooth out any bigger lines, wait another 202=-60 minutes and then smooth it further with a wet sponge. And presto! A smooth wall/ceiling with no need for sanding (I hate dust !!! ). I was hoping to do the same with this one unfortunately I have just wasted my time, money and a lot of sweat trying to smooth that hard "cookie dough" as another reviewer called it. I chose this thinking it is the same as there is another "Quick Drying" type available from same manufacturer so assumed this would not be. It was really thick so I said at first I'd cover a few screw heads first. Only it dried on my filling knife just as I was doing it so couldn't work with. I then added some water so thin it and made it quite runny so I went to apply a finish on my ceiling but again: you trowel it once, maybe get a chance to go immediately on more time over with the trowel to smooth it but on a third go is already dry and crumbles. I messed up a quarter of my ceiling now so I will have to go back to my favourite brand. I checked the bucked and expiry date is 09/24 so it's not gone off. I even tried to fix some crack lines around a socket I've changed and managed to botch that job too. Not too sure if I could return it or claim anything so it goes in the bin with the disappointment of a day's delay and more work. Again: maybe an extremely skilled professional can use it with the advantage of such quick drying but for DIY = NO !
Flubber1234 - 5 / 5 - 26/07/2023
Great product
Easy to use. Ready mixed and dries quickly, would recommend
elise2001 - 5 / 5 - 21/06/2023
excellent product
I purchased the product to fill holes and joining gaps in newly fittedplasterboard and it did the job perfectly