Volden Ready mixed Plasterboard Jointing, filling & finishing compound 25kg 15L Tub

Product information

The perfect all-rounder. Gypsum based, this ready mixed product has been designed for jointing plasterboards when drylining and and for levelling wall irregularities. Easy to sand in preparation for decorating.

• Using a trowel apply the first layer - an even surface can be achieved with a skim coat not exceeding 5mm in thickness. Allow approx 90-120 minutes for the base layer to dry and apply a second layer, finish to achieve a smooth and level surface. Once set hard, gently rub down using sandpaper. Brush or wipe down the sanded surface to remove any dust created from sanding. Once the surface is clean it will be ready for decorating using matt or silk vinyl paint. Drying times can be impacted by site conditions/temperatures and/or the thickness of the layer applied, For oil based paints a suitable primer must be used, Clean your tools with clean water after use.
• Designed for jointing plasterboards when drylining and and for levelling wall irregularities. Easy to sand in preparation for decorating
• Keep out of reach of children and animals. Inhalation of dust must be avoided. The work area must be ventilated or move to fresh air. A suitable face mask should be worn if sanding. Dust may be an irritant to eyes, sensitive skin or respiratory system. If irritation persists seek medical advice. Ingestion should be avoided. If ingested, rinse mouth with clean water and seek medical advice.

Features and benefits

• Perfect for filling, smoothing walls, ceilings and plasterboard repairs
• Ready Mixed
• Easy to sand
• This plaster's white colour ensures a lower number of coats while painting
• Can be stored and reused at a later date (see use by date on packaging)