Volden TX10 Paint & varnish remover, 5L 5m²

Product information

Volden TX10 Paint & Varnish Remover (5m²) is a highly effective solution for removing multiple layers of paint and varnish from various surfaces, including wood, metal, and masonry. Ideal for renovation and restoration tasks, it works quickly to lift stubborn coatings without damaging the underlying material, preparing surfaces for refinishing or repainting.

• For Interior & exterior use
• Safety Information - Contains. Benzyl Alcohol WARNING Causes serious eye irritation. Harmful if inhaled. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Use only outdoors or in a well-ventilated area. Wear protective clothing, eye protection, face protection, protective gloves. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Call a POISON CENTRE or doctor if you feel unwell. UFI: DHOO-COTV-Q00D-1SNF
• Surface Preparation - Remove any grease or dirt from substrate prior to use
• Instructions for Use - Preparation: Read label before use. Wear gloves. Protect floor coverings, textiles and vinyl materials. Shake container well before use. Application: 1. Transfer the required amount of the remover into a suitable container. 2. Apply a generous coat onto the surface to be stripped with a suitable brush at a rate of 1 litre per square metre of surface. 3. Leave for approximately 1 hour and apply a second coat. 4. Once the remover has penetrated into the substrate, scrape off leaving the surface as clean as possible. 5. Rub down stripped area using a scrubbing brush or stainless steel wool and water. Rinse with water and allow to dry.

Features and benefits

• Removes old top coats of paint & varnish
• Zero drip gel formula
• Suitable for use on wood, metal, stone and concrete
• Multi Surface Use
• Suitable for Use with Most Paint Types
• Ready To Use