10 people bought this in 48 hours
Volden Yellow Liquid contact adhesive 400ml
Under 18 yearsProduct details
Product information
Volden Contact Adhesive is a universal, toluene free, solvented ready to use contact adhesive based upon rubber and synthetic resins.
- Guarantee - Statutory
- Suitable for Cork, felt, laminate, leather, MDF, metal, PVC, rubber, stone, plastics except polystyrene (PS) PE, PP, PTFE
- Resistant to moisture & water
- 12 months in unopened packaging in a cool and dry storage place at temperatures between +5°C and +25°C
- Apply an even coat of the adhesive with a spatula or a brush onto both surfaces to be bonded together. Wait for 10 minutes then align the surfaces carefully and join both parts together. Push firmly from the centre outwards to remove any air pockets.
- Contains: Acetone, hydrocarbons, C6-C7, n-alkanes, isoalkanes, cyclics, n-hexane, cyclohexane, ethyl acetate. Highly flammable liquid and vapour. Causes skin irritation. Causes serious eye irritation. May cause drowsiness or dizziness. Toxic to aquatic life with long lasting effects. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Wear protective clothing, eye protection, face protection, protective gloves. Use only outdoors or in a well-ventilated area. Wash hands thoroughly after handling.
Features and benefits
- Water Resistant
- Can be applied on most substrates including: Laminate, Leather, Rubber, Felt, most Plastics, Cork, MDF, Wood, Metal, Stone and PVC
- Not suitable for: PS (polystyrene), PE, PP, PTFE
- Adhesive is water resistant, but not suitable for water immersion. This product is not to be used for carpet laying.
- Bonding of many materials such as rubber, leather, cork, plastic, felt, etc. on various types of substrates or among themselves. Also bonding of synthetic decoration panels and worktops in wood, metal or board
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
DetailsSpecifications
| Application method | Spreader |
|---|---|
| Base | Solvent-based |
| Bonding strength | High bond strength |
| Colour | Yellow |
| Container type | Tin |
| Location | Interior & exterior |
| Maximum application temperature | 25°C |
| Minimum application temperature | 5°C |
| Odour | Medium odour |
| Sandable | Non-sandable |
| Solvent-free | Solvented |
| Volume | 400ml |
| Weight (g) | 339g |
| Product code | 5059340613956 |
Manufacturer / EU responsible person
Reviews
4.73 / 5(15 reviews)Bluesclues - 5 / 5 - 30/04/2025
Volden adhesive
Bought to give stick on tiles a bit of extra adhesive, it works great
Musherine - 5 / 5 - 21/04/2025
very helpful
This product is very helpful and easy to use.done the job exactly what I needed.
TC07 - 4 / 5 - 13/03/2025
The same quality as other more expensive make
Just as good as the welknown make, but be aware the tin is only 3/4 full.
Bobbydazzle4 - 5 / 5 - 05/02/2025
Excellent product
Excellent product, just as good if not better than the branded versions
DIY student - 4 / 5 - 30/11/2024
Bond At First Go, Wait, See How Long This Last
I bought Volden 400ml tin liquid contact adhesive to bond glass and polycarbonate. The challenge I faced was spreading the adhesive in good time to bond both surface area 36'' x 70''. I used recycled plastic gift card as spreader, direct dip into the tin opening which was 5mm smaller than the wide edge of the card, so I had to use the narrower edge of the card to get into the tin. I spread the adhesive as fast as I could, but not as calm as I would have liked it to be. The result is, not as smooth as I wish it to be, but it's done, some things in life can only be done once, I think this was one of it. I did not use the plastic tooth-spread supplied with the adhesive because I felt it was too small for what I needed to do, and would take longer to complete the adhesive spread which could compromise the bonding result. I did this outdoor, temperature was about 10ºC. There is approximate 10% adhesive remains in tin, I close the tin lid as tight as I could, I'll have to wait and see if this adhesive remains viable for other future small task. Each project is unique, I hope this helps you in some ways with things you want to bond or repair or make. Good luck.
419 - 5 / 5 - 09/09/2024
Amazing product
This is an amazing product. I used it for my shoes
MikeyPlum - 5 / 5 - 27/08/2024
Equitable product
This contact adhesive satisfies most domestic uses and is at an equitable price.
Natedog - 5 / 5 - 25/08/2024
Sticky glue
Been looking for a good all purpose glue ,this certainly fits the bill
Kay7 - 5 / 5 - 11/08/2024
Great Product
Great Product and really good value for money - would highly recommend.
School teacher - 5 / 5 - 01/07/2024
Volden cotact adhesive
I have used may different make of contact adhesive, but this is so far the best one I have come across. I have used for repairing shoes, leather, rubber, crape soles and plastic with cotton and wood materials. It is also very easy to use, but I recommend use glue and face mask. I recommend this glue because it is really best product. It is cheaper then other products in the market.