10% off everything online for one week only* | Offer ends 9 December
See more Fillers
Diall Fine finish Ready mixed Finishing plaster, 1kg Tub
- Can be applied to rough or painted walls, render, glass cloth, old decorative coatings, textured finishes, plaster, plasterboard, gypsum blocks, concrete, cement, brick and stone.
Features and benefits
- Ready to use
- Perfect for renovating and smoothing walls that are deteriorated or with contours up to 5mm deep
- 24 hours drying time
- Sandable and Paintable
|Drying time||24 h|
|Ready for use||Ready mixed|
|Number of coats||2|
Frano101 - 5 month ago
Until now we had always used polyfilia skimming skin to cover imperfections. This Diall product is much easier to use and to spread. Sanding is easy but the fine dust goes everywhere. We also tried to cover hairline cracks on walls but we did not have much success maybe due to sanding too much.
This product is great
Jennywren - 8 month ago
Much better than Polyfilla! It is easier to sand. Wonderful
Easy to use, looks great!
Nicola33 - 8 month ago
After heating pipe burst we found ourselves cutting a a rather large hole in our bedroom wall.
After fixing the plasterboard we applied this over the top (2 coats over two days) and will sand before painting.
Easy to use, wipes off the painted walls easily, and I don't think you'll be able to tell it was ever fixed once we are finished - a little bit goes a long way, this was one 1kg tub
Smoothly does it
Foxey at Home - 1 year ago
I use it for rough work on painted wood surfaces where the original paint has blistered leaving an uneven surface the thickness of the paint. I have used many other products like this, but this has been far the best so far. After rubbing down I prime the bare wood before filling.
It has a good long shelf life when replacing the lid on the tub , as this gives a good airtight seal therefore prevents it drying out.
When allowed to dry, the rubbing down with fine grade sand paper gives a very good smooth finish ready for painting
Not a filler
g1g - 1 year ago
My mistake, I bought to fill small holes, it is intended to smooth already fairly smooth surfaces. any more than 1 mm and it takes for ages to dry and cracks when it does dry