8 people bought this in 48 hours
Erbauer 750W 90-600V Corded Tile cutter TC180VI
Electrical recycling service
Thinking about buying a new electrical product from us? Find out about our electrical recycling service here
Product details
Product information
The Erbauer 750W Tile Cutter can be used to cut all these types of tile: ceramic, quarry, terracotta, slate, porcelain, marble, granite & limestone.
- Guarantee - 2 years
- Comes with 2x spanner
Features and benefits
- Cast aluminium deck for added durability and corrosion resistance
- Quiet induction motor to reduce fatigue
- Cuts all these types of tile: ceramic, quarry, terracotta, slate, porcelain, marble, granite & limestone
- Extension table allows cutting of larger tiles
Specifications
| Brand | Erbauer |
|---|---|
| Colour | Blue |
| Compatible blade diameter | 180mm |
| Cooling method | Fan cooled |
| Depth (cm) | 60cm |
| Disc bore size (mm) | 22.2mm |
| Height (cm) | 51.5cm |
| Maximum bevel right | 45° |
| Maximum cutting capacity (45° bevel) | 17mm |
| Maximum cutting capacity (90° bevel) | 30mm |
| Model name/number | TC180VI |
| Motor type | Induction |
| No load speed | 3000 rpm |
| Pack quantity | 1 |
| Power voltage supply | 90-600V |
| Switch type | Magnetic safety switch |
| Wattage | 750W |
| Width (cm) | 26cm |
| Product code | 5059340394305 |
Manufacturer / EU responsible person
Reviews
4.42 / 5(7 reviews)Asubonteng - 5 / 5 - 21/08/2023
DIY Garden Patio
bought this to cut 600x900mm, 20mm thick porcelain pavers. I underestimated this machine. it does the job so well,due the size of slabs, it needs 2 persons to hold for cutting. Decent volume water tank, fill water as low as you can to avoid getting soaked (1.5L) You will need to change water for every 7-10 cuts as water get’s dirty machine struggle to turn. I will Recommend this machine 100%
I cut tiles 12 - 4 / 5 - 27/07/2023
Wet saw
With this wet saw you have to take your time to set this up. I tried to make cuts straight out of the box.But the first part of the cut was in-line however, the second part out of line by over 5mm so I changed blade for a fine cut RUBI and fixed the rule guide which flexed first time round.
sgeir2005 - 5 / 5 - 27/04/2023
Tile Saw
Well made good purchase for the price, only tried and tested so far all appears OK, hopefully should perform and last as it feels and performs at reasonable quality. Acceptable noise level when being used.
DianneAndJoe - 4 / 5 - 25/04/2023
Great product for the price
I bought this is our manual tile cutter would not cut the floors tiles we had bought. It is easy to set up, not too noisy and does the job well. The only bad point is the fence, I think we over tightened it slightly and it snapped, but was fixed with some superglue. It would be better if it was metal.
mattystar - 5 / 5 - 28/03/2023
Great Value
I expected a high quality tile cutter to be hundreds of pounds, but this one is an absolute bargain, and great value, just like many other erbauer products! It cuts the tiles with ease, and we have thick stone floor tiles, making those difficult shapes and corners much easier to manage.
Andygt - 5 / 5 - 24/03/2023
Great tile cutter
I bought this to cut 600x300 porcelain tiles, it does the job well, decent volume water tank, sturdy built.
AndrewL01 - 3 / 5 - 02/02/2023
Beware - Description errors
To say that there are errors in the description is putting it mildly. If, like me, you chose this one in part because the description mentions a laser line, prepare to be disappointed; there is no laser line. On the plus side, I just made my first two cuts with it and it performed the job quite adequately. Putting the user manual, including unpacking instructions INSIDE the device is unhelpful. But I found them. The packing list diagram does not show all the parts. Knobs, springs, washers present but not on the diagram. If you are expecting this machine to operate on voltages other than 220-240v based on the description; good luck! See photo. Should have bought the cheaper probably identical Erbauer from Screwfix. But it does cut tiles.