See more Shelf brackets
Form Timber Pine Shelving bracket (H)300mm (D)250mm
- Compatibility: From 250 to 450mm shelves
- Compatible with 250 to 450mm shelves
- Locate wall studs and mark mounting locations on the top hole of the brackets, ensuring the holes are level. You should install brackets into all possible studs along the length of your shelf for stated load capacities. Partially install screw into marked holes at stud locations leaving a small gap for bracket adjustment. Place the top hole of the bracket onto screw and push down to secure. Use screws to secure the bottom of the bracket into the stud. Tighten down the top screw. Rest shelf on brackets. Use screws to secure the board to the brackets
- Fixings sold separately
Features and benefits
The wooden bracket for natural look shelving
- The maximum load shown may be lower depending on wall condition. All loads should be distributed evenly
|Product type||Shelving bracket|
oldie76 - 4 month ago
Supports my shelves very rigidly. No flexing at all, and the paint finish is good.
jon1983 - 1 year ago
Bought a bunch of these to hang some shelving round my room using some of the white melamine 2m shelf boards to display models.
They were easy to fit look great.
The inner screw weren't too difficult to fit I had to find a longer screwdriver tho
Just one note is that they are listed as Depth 150mm when in fact it is actually 250mm.
White Wooden Wall Bracket
VimFuego - 1 year ago
Okay quality but over priced. Hole placement makes it difficult to screw into wall due to cross support.
Handy cheap shelf brackets
SVL - 1 year ago
I used these to put up shelves in my shed. They are absolutely adequate for this.