GoodHome Morseby White Wired LED Bulkhead light
Electrical recycling service
Thinking about buying a new electrical product from us? Find out about our electrical recycling service here
Product details
Product information
Product information
The Morseby white bulkhead light is perfect for brightening up areas such as your basement, cellar or attic. It provides a neutrally toned and high intensity brightness as well as a large beam angle.
- Bulb included
- Non-dimmable
- Fittings & fixings included
- Guarantee - 5 years
Features and benefits
- This LED-integrated light has a five-year guarantee
- Designed for use in wet areas like bathrooms
- Rectangular modern design
Specifications
| Brand | GoodHome |
|---|---|
| Bulb type | Integrated |
| Cap fitting | Integrated |
| Depth (mm) | 55mm |
| Fire rated | Not fire-rated |
| Fire rating | Not fire-rated |
| Glass finish | Frosted |
| Height (mm) | 200mm |
| IP rating | IP44 |
| Light colour | Neutral white |
| Light technology | Integrated LED |
| Lumens | 1000lm |
| Material | Plastic |
| Maximum bulb wattage | 16W |
| Motion sensor | Without motion sensor |
| Number of bulbs | 1 |
| Power output | 16W |
| Power source | Mains-powered |
| Power voltage supply | 220-240V |
| Style | Traditional |
| Width (mm) | 55mm |
| Wiring required | Wiring required |
| Product code | 5063022044372 |
Documents
Product Instruction Manual
Safety Information
Do not use with a dimmer switch
All fittings must be installed by a competent person in accordance with local regulations (IET wiring regulation BS7671).
Check the pack and make sure you have all of the parts listed.
Remove all packaging, wrap etc from the product.
Decide on the appropriate location for your product
CAUTION: IP44 is guaranteed when the product is properly installed and sealed
Always avoid the product to be located at corrosive environment.
Always refer to the installation drawing for the orientation of the product.
The product must be securely fixed to the mounting surface using the screws and wall plugs supplied. The screws and wall plugs supplied are suitable for “masonry” only. Other fixings not supplied and must be purchased.
Take care not to drill into any pipes or mains cables beneath the surface during mounting holes preparation.
Manufacturer / EU responsible person
Manufacturer
Kingfisher International Products B.V.
Address
Rapenburgestraat 175, E,
Amsterdam
1011 VM
Netherlands
Contact
Reviews
5 / 5(1 reviews)Stevie 1 - 5 / 5 - 10/10/2025
Efficient LED Bulkhead Light
I bought this Morseby White Wired LED Bulkhead light for my newly decorated under stairs Pantry. It was easy to install and compact, giving a high level of illumination in a dark area. The integral LEDs are energy efficient when compared with a standard bulb or halogen light and have a long lifespan. I am very pleased with this light and am considering replacing two old existing bulkhead lights in my porch with this type.