GoodHome Szilard Modern LED Ceiling fan light

Do not use with a dimmer switch. Means for disconnection must be incorporated in the fixed wiring in accordance with the wiring rules. Never use the terminal cables to bear the product weight.

All fittings must be installed by a competent person in accordance with local regulations (IET wiring regulation BS7671). The ceiling fan has to be fitted in rooms where the blades are more than 2.3 metres (7’ 6 1/2”) from the floor, please allow 500 mm (19 3/4”) distance between the tips of the blades and the walls or furnishings. The fixing point(s) selected must be capable of supporting the full weight of the ceiling fan. The fixing means for attachment to the ceiling such as hooks or other devices shall be fixed with a sufficient strength to withstand 4 times the weight of the ceiling fan. The mounting of the suspension system and the replacement of parts of the safety suspension system device shall be performed by suitably qualified persons.

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliane in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

This product is suitable for indoor use only and not for areas constantly subject to moisture such as bathroom. Always refer to the installation drawing for the orientation of the product. Take care not to drill into any pipes or mains cables beneath the surface during mounting holes preparation. If the battery compartment does not close securely, stop using the product and keep it away from children. CAUTION: Risk of explosion if the battery is replaced by an incorrect type.

WARNING: If unusual oscillating movement is observed, immediately stop using the ceiling fan and contact suitably qualified persons.

Replaceable control gear by a professional.

When the product does not light after installation: > Ensure there is no electricity failure > Ensure all the connections are secured

If you have any doubt about installation/use of this product, consult a qualified electrician

Always disconnect the product from mains at least 10 minutes allowing to cool down before any maintenance or adjustment.

It is recommended to have a regular schedule of care and maintenance to keep the surface condition well.