GoodHome Tilman Grey Wired LED Bulkhead light (Dia) 39cm
Electrical recycling service
Thinking about buying a new electrical product from us? Find out about our electrical recycling service here
Product details
Product information
Product information
The GoodHome Tilman grey frame 28cm bulkhead light is the ideal low light for supporting areas such as your basement, cellar or attic, perfect for low hanging ceilings. It provides a neutral light, high intensity brightness and a large beam angle for extra visibility.
- Bulb included
- Non-dimmable
- Fittings & fixings included
- Guarantee - 5 years
Features and benefits
- Circular design
- Designed for use in wet areas like bathrooms and shower rooms
Specifications
| Brand | GoodHome |
|---|---|
| Bulb type | Integrated |
| Cap fitting | Integrated |
| Depth (mm) | 70mm |
| Fire rated | Not fire-rated |
| Fire rating | Not fire-rated |
| Glass finish | Frosted |
| Height (mm) | 390mm |
| IP rating | IP65 |
| Light colour | Neutral white |
| Light technology | Integrated LED |
| Lumens | 1600lm |
| Material | Plastic |
| Maximum bulb wattage | 23W |
| Motion sensor | Without motion sensor |
| Number of bulbs | 1 |
| Power output | 23W |
| Power source | Mains-powered |
| Power voltage supply | 220-240V |
| Style | Traditional |
| Width (mm) | 65mm |
| Wiring required | Wiring required |
| Product code | 5063022044716 |
Documents
Product Instruction Manual
Safety Information
Do not use with a dimmer switch
All fittings must be installed by a competent person in accordance with local regulations (IET wiring regulation BS7671).
Check the pack and make sure you have all of the parts listed.
Remove all packaging, wrap etc from the product.
Decide on the appropriate location for your product
CAUTION: IP65 is guaranteed when the product is properly installed and sealed
Always avoid the product to be located at corrosive environment.
Always refer to the installation drawing for the orientation of the product.
The product must be securely fixed to the mounting surface using the screws and wall plugs supplied. The screws and wall plugs supplied are suitable for “masonry” only. Other fixings not supplied and must be purchased.
Take care not to drill into any pipes or mains cables beneath the surface during mounting holes preparation.
Manufacturer / EU responsible person
Manufacturer
Kingfisher International Products B.V.
Address
Rapenburgestraat 175, E,
Amsterdam
1011 VM
Netherlands
Contact
Reviews
5 / 5(1 reviews)KH5 - 5 / 5 - 06/01/2026
Great
Nice simple design, just what we were looking for. Light is nice and bright. Easy to fit. Would recommend.