See more Sealants
UniBond Healthy kitchen & bathroom Mould resistant Light Grey Silicone-based Sanitary sealant, 300ml
UniBond Anti Mould silicone sealant is specially formulated for use in bathrooms and kitchens, where resistance to mould growth is necessary.
- Completely remove any existing sealant and residues. Thoroughly clean the joint to remove contaminants and allow to dry. Cut off the tip of the cartridge above the screw thread. Remove nozzle cap and trim nozzle diagonally to fit the joint width. Screw the nozzle onto the cartridge. Insert cartridge into a cartridge gun. Pull trigger to apply sealant into the joint. Ensure sealant has good contact with both sides of the joint. Smooth sealant with a sealant finishing tool within 5 minutes. Remove excess sealant immediately using white spirit
Features and benefits
This concrete-grey sealant forms a permanently flexible seal that is perfect for warm and humid environments.
- Mould resistant
- 20 mins touch dry
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Drying time||24 h|
|Resistant to mould||Mould resistant|
|Resistant to water||Waterproof|
|Standard||EN 15651 - 3|
Absolutely stinks and comes off easily
Kempo73 - 5 month ago
I bought the dark grey and the colour was perfect. Unfortunately, the acidic smell is overpowering we had to open all the doors and windows and it still took a day to go away completely. Once it had completely dried I wiped around it and it just came of in little clumps so totally useless. Will be looking for an alternative!
Sealant fine but more mid-grey than light grey
Rich82 - 9 month ago
Sealant good enough and application / adhesion as expected. Agree with other comments that this is not light grey as advertised. I'd read those reviews and bought anyway as didn't really affect me, so was fine for my application. But can appreciate for others that may be a problem. Photo shows sealant after 24 hours.
Plain Acidic Silicone
ivan123 - 11 month ago
Really bad Acidic smell, not really light grey, more normal grey color. Adhesion is poor when compered to other twice cheaper products on the market.
LBB1 - 1 year ago
Not as described. We applied this today to light grey tiles in the shower area and it will need to be removed as it is extremely dark.
Loved the colour and easy to apply
Aim - 1 year ago
I have mid grey worktop and dark grey tiles so I was unsure what colour to go for and couldn't find a picture of any of them once applied and dried. It was really hard to know what colour they actually came out and I read loads of reviews to try and gauge how light or dark they were so here is a picture. Other than that it's silicone and it does what silicone should do! I found it easy to apply and the colour ended up being perfect for my worktop.