UniBond UltraForce Ready mixed Black Wall tile Grout, 1.38kg Tub
Product details
Product information
UniBond UltraForce Wall Tile Grout is ready to use and ideal for completing tile projects. Featuring Ultra Force advancement, this grout provides lasting results by resisting moisture and protecting against mould. Its three-layer protection system ensures strength, making it a reliable and sturdy choice for tiling.
- For Grouting of interior wall tiles, max joint width 8mm
- Ensure that the grout joints are clean, dry and free. Working in small areas at a time, press the grout into the joints with a grout float. Smooth off the grout line with a grouting tool. Remove any surplus grout immediately with a damp sponge wiping diagonally across the tiles. Allow the grout to dry for 24 hours then polish with a clean cloth.
- Contains a fungicide to protect the product against mould growth only. Contains: 2-0ctyl-2H-isothiazol-3-one preservative(s): lsothiazolinone mixture 3:1 (CIT/MIT). May produce an allergic reaction. Keep out of reach of children. If medical advice is needed, have product container or label at hand. Do not get in eyes, on skin, or on clothing.
- Grouting of interior wall tiles, max joint width 8mm
- Ensure that the grout joints are clean, dry and free. Working in small areas at a time, press the grout into the joints with a grout float. Smooth off the grout line with a grouting tool. Remove any surplus grout immediately with a damp sponge wiping diagonally across the tiles. Allow the grout to dry for 24 hours then polish with a clean cloth.
Features and benefits
- Dark hue for an elegant finish
- Advanced formula for durability
- Triple protection to prevent mould
- Pre-mixed for convenience
- Suitable for ceramic, porcelain and mosaic tiles
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
DetailsSpecifications
| Application method | Float |
|---|---|
| Brand | UniBond |
| Colour | Black |
| Coverage | 3.2m² |
| Drying time | 24 h |
| Location | Interior |
| Material | Jointing compound |
| Pack quantity | 1 |
| Standard | BS EN 12004-1: 2017 Type D2TE |
| Weight (kg) | 1.38kg |
| Product code | 5010383320393 |
Safety Information
Manufacturer / EU responsible person
Reviews
3.66 / 5(3 reviews)Chas 2020 - 5 / 5 - 11/10/2023
End result looks fabulous!
Great easy to use premixed coloured grouting that takes your tiling (assuming you’ve kept the spacing even) to a higher level. Instant hotel vibe! Don’t panic in the wipe down phase - it will come clean with a little effort.
Mani - 1 / 5 - 29/04/2023
Poor quality
Very disappointed with this grout. After application with a grout float it sank 10 minutes later so and I had to add more a couple of times. After finishing with a sponge it looked fine but after a while it had bad patches where it sunk again. Grouting is normally an easy job but with this it was very hard to get a half decent finish. I also found the consistency too watery, and it takes too long to set.
gigi82 - 5 / 5 - 10/11/2021
Great grout
For a little tub. It really does go along way. Used with black gloss brick tiles for a splash back in the kitchen. Totally finishes the walls off. Easy to use and easy to clean off after.