Valspar Trade Walls & Ceilings Interior Wall & ceiling Silk Emulsion, Base C, Base C, 10L

Inc.VAT

per l

Checking availability...

Product details

Product information

Surface Preparation - For indoor use only. Do not apply in damp or humid conditions. Apply when the temperature of the surface being painted is above 10°C. New plaster and other bare, absorbent surfaces must be sealed prior to painting. Remove old, loose or flaky paint and repair all damaged areas before painting. The surface must be clean, dry and free of dust and grease. Glossy surfaces should be deglossed before painting.
Instructions for Use - Stir well before use to ensure paint is thoroughly mixed. When purchasing more than one container of the same colour, intermix containers to ensure colour uniformity. If you feel that you may run out of paint, stop at a corner or a natural break. Apply 1–2 coats using a suitable brush, roller or sprayer. Apply liberally, avoiding excessive rolling or brushing, working from dry areas into the paint’s wet edge giving you a levelled finish. A tintable primer is recommended when making dramatic colour changes to avoid additional coats. Touch dry in about 1 hour. Allow 2-4 hours between coats. When using a sprayer, refer to the sprayer user guide for full instructions before use. You can dilute this paint with water, however, when you dilute the formula you dilute the quality. Therefore, we cannot guarantee the claims we make on pack if the formula is diluted with water.

Features and benefits

High opacity & covering power
Superior durability & scrubbable
Stain resistant
For interior walls & ceilings
Suitable for a brush, roller or sprayer
Water based formula
Up to 17m² per Litre
Minimal VOC

Legal Information

Contains 1,2-benzisothiazol-3(2H)-one and reaction mass of 5-chloro-2-methyl-2Hisothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction. Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.

Health and safety

Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.

Details

Specifications

Brand	Valspar Trade
Application method	Brush, roller or spray
Base	Water-based
Coverage	170m²
Drying time	2-4 h
Finish	Silk
Instructions for storage	Store in a cool, dry place avoiding damp areas and extreme temperatures.
Location	Interior
Maximum application temperature	25°C
Minimum application temperature	10°C
Minimum touch dry time	1h
Number of coats	2
Paint base density	Deep base
Recoat time	2-4 hours
VOC level	Minimal
Volume	10000ml
Product code	5055018163242